Combination 2 Person Sauna

100% Non-Resinous Canadian Hemlock Wood:

Our saunas are built without plywood, glues, or stains. We use heavy duty screws and nails in contrast to glued together plywood sold by other companies.

Premium Warranty:

We offer a 10 year warranty on the sauna and 6 year warranty on the electrical components and heaters.

Industry Low EMF/ELF/RF Levels:

We use Low EMF/ELF Heaters, Grounded Faraday Shielding, Cable Shielding, and no RF to ensure a safe and health-conscious experience.

8mm Tempered Glass:

Our sauna windows and doors are made with thick tempered glass for heat retention and durability. The dark color of the glass contrasts the light unstained Hemlock very nicely.

Glass-Covered Chromotherapy Lighting:

All of our saunas come with a glass covered chromotherapy light giving you the ability to choose from a multitude of light colors. It’s important to use a glass cover instead of plastic covers because you don’t want plastic in the ceiling of the sauna where temperatures get the highest.

Customizable Ventilation:

Our sauna vents can be opened or closed while sitting in the sauna. You can keep them closed to increase the heat-up speed and then open them to your liking during your sauna session.

Elevated Bench:

Even though our ventilation system is designed to move the hot air throughout the sauna, hot air still rises. Our elevated bench keeps you in the hottest part of the sauna.

Harvia KV-60-S Stone Heater + Sauna Rocks:

We strictly use the Harvia KV-60-S because of it’s performance and ease of use. The control knobs are near the top of the heater making it much easier to manipulate than when the knobs are on the bottom. Harvia is the most trusted name in Sauna Heaters.

Exterior: 59.1 in. Width / 43.3 in. Depth / 75 in. Height
Interior: 55.6 in. Width / 39.7 in. Depth / 71 in. Height
Weight: 485 pounds + traditional heater and rocks

Recommended two inch gap between the sauna and any walls or ceilings

Lights:

120V, plug into any standard outlet

Infrared Heaters:

120V
Dedicated 20 Amp
Standard US 20 Amp 3-prong plug

Traditional Heater:

240V
Dedicated 30 Amp
Electrician Required
Harvia KV-60-S (controls built on heater)
KV60 needs a 2 pole 30 amp non-GFCI breaker.
Run (2) #10 copper wires + ground to heater.
Wires connect to heater terminals 1 and 2.
Make sure to run the thermostat wire up the face of the sauna wall. Sensor mounts a foot down from the ceiling and about a foot away from the side of the heater.

2 Person Combination Assembly Manual

10 Year Warranty on the Sauna Room
6 Year Warranty on Electrical Components and Heaters